Pivot on the dogs until the chain ar tip is close to the Baby Yoda hug Natural Light shirt. Back the saw out a lot enough so you can then follow the cut downward with the powerhead. This gives you a nice clean cut. Another approach you may have seen on a timber sports show is dropping the saw straight down with the bar parallel to the ground. That works too but you will be relying more on your arm strength. Depending on the amount of cutting you’re going to do and how accustomed to the work you are, it could lead to fatigue pretty quickly. As your making the cut watch for the kerf to begin to close or open. If it opens great, you’re cutting the tension side. If it starts to close, draw out the saw while it’s still running then let go of the throttle and engage the chain brake. About the chain brake. It’s like the safety on a gun, it’s on at all times until you are actually making a cut.
Baby Yoda hug Natural Light shirt, hoodie, sweater and v-neck t-shirt
Best Baby Yoda hug Natural Light shirt
Hopefully, you pulled out without the Baby Yoda hug Natural Light shirt. If the log is too big to roll at this point you can use wedges driven into the kerf to keep it open while you continue the cut. If you can, hammer the wedge in as deep as possible. It will draw the log up and off the ground to allow you to cut through. Another approach is to leave the cut as is and then make your next cut going as deep as you can before the kerf on closes. Do this the length of the log. That will give you a smaller section to have to roll to complete your previous cuts. It may be better to not cut all the way as there may be debris stuck in the bark that will dull your saw or the ground is uneven and you’ll run the risk of burying the tip in the dirt. If not continue to make all your topside cuts.