You’ll need to determine if the log is under tension or compression on the Baby Yoda hug Miller High Life shirt. It may vary over the length depending on the log’s shape and the terrain it’s on. Always try to cut on the tension side. This way the cut will open as you work through the log. If it starts to close you’ll end up with the bar pinched and if it’s a big enough log, unable to get the saw out. That would be the compression side. Here’s where your additional tools come in. If the log is too big to roll to a place where the top side is all under tension then use the wedges driven into the kerf to keep it open. The cant hook or the peavey are great tools to roll the log with. You can use a log jack to roll and lift the log so that a portion of it is off the ground and the tension side is on top from the log jack to the end up in the air.
Baby Yoda hug Miller High Life shirt, hoodie, sweater and v-neck t-shirt
Best Baby Yoda hug Miller High Life shirt
Now that you’ve got all that done mark the cuts along the length of the Baby Yoda hug Miller High Life shirt. You can adjust to make sure there isn’t an odd cut-off or in the event, you found metal that couldn’t be removed, falling in line with a cut. Right, now for that cutting. If you read the manual you are familiar with the parts of the saw. Fire it up and line the saw up square to the log. They are meant to be run at full throttle so don’t go half when cutting. If the bar is long enough to cut through the whole log then start with the dogs resting about 3/4s down the near side with the chain off the log. Go full throttle and steadily lower the saw into the wood. A sharp chain will draw into the wood without you having to muscle it. Let the saw do the hard work, you control it to maintain cutting speed and direction.